AXIS T93F20 Outdoor Housing can power the camera and its heater and has a temperature range from -40 °C to 60 °C (-40 °F to 140 °F) for the housing itself. The temperature range in running operation depends on the camera model. For more information please check the datasheet. The housing is very power efficient and only requires 15 W PoE at a cold start in -40 ºC/ºF. AXIS T93F05 Protective Housing is a pure protective enclosure and does not have any electronics inside. Therefore, the lower temperature specification is 0 ºC. AXIS T93F Housing Series has IP66 and NEMA 4X protection rating against the ingress of dust, windblown dust, rain, high pressure water jets from any direction, hose-directed water, and damage from external ice formation. IK10-rated for protection against impact and vandal acts. In addition, the cables are vandal protected and it is prepared to accommodate an optional alarm switch that triggers at vandal attempts. AXIS T93F Series is out-of-the-box ready for installation outdoors. AXIS T94Q01A Wall Mount is included. For installations involving protective pipes, AXIS T94R01P Conduit Back Box (optional accessory) should be used. Threaded holes underneath the housing simplify installation of Axis Illuminators.
|Certifications||Approvals: EN 50581, IEC/EN/UL 60950-1, IEC/EN/UL 60950-22, • IEC/EN 60529 IP66, NEMA 250 Type 4X, IEC 60721-4-3 Class 4M4, • IEC 60068-2-6, IEC 60068-2-27, IEC/EN 62262 IK10 • AXIS T93F10/T93F20: EN 55022 Class B, EN 50121-4, • EN 61000-3-2, EN 61000-3-3, EN 61000-6-1, EN 61000-6-2, • EN 55024, FCC Part 15 Subpart B Class B, ICES-003 Class B, • VCCI Class B, C-tick AS/NZS CISPR 22 Class B, KCC KN22 Class B, • KN24, IEC/EN/UL 60950-22 • AXIS T93F20: FCC Part 15 Subpart B Class A|
|Operating Temperature||-40 to 45 °C|
|Operating Humidity||15 to 100 %|
|In The Box||AXIS T93F20 Outdoor Housing • AXIS T94Q01A Wall Moun AXIS Connector Guard A • AXIS Cable Gaskets M20, Screw bit T30 • Installation Guide • Required tool: Torx screwdriver T20 • AXIS T93F20: Angled network cable (15 cm/5.9 in)|
What happens after I've placed an order?
Once you place an order with us you'll receive an email confirmation listing all your items ordered. You should keep this email for future reference as it also acts as your invoice. We then start to process your order; the order is transmitted to our paperless production facility, built, checked for quality, handed to our installation engineers who then proceed with setup of any software you've ordered, then run through our burn-in and stability tests, checked once more for quality and finally it's handed to our dispatch department who will pack the order and book it in for delivery. Depending on how busy we are this entire process takes around 3-5 working days.
What delivery options are available?
Standard weekday deliveries to UK mainland addresses are free of charge
FREE UK Delivery - UPS/DPD Tracked
The majority of orders are sent by DPD courier (www.dpd.co.uk) who provide a fully trackable service. For orders being sent to UK mainland addresses you'll also benefit from DPD's Predict service - assuming you provide us with a valid email address and mobile phone number you'll receive email and SMS notifications from DPD in the morning before delivery with a predicted one hour delivery slot. If this slot turns out to be inconvenient you can re-arrange the delivery for another day, just by replying to the email or text message.
PEACE OF MIND 3 YEAR WARRANTY
When purchasing our computer you will get a 3 Years Warranty as standard, you have the peace of mind in knowing that there will be no cost involved should a problem occur with your hardware - you can simply box up the computer in its original packaging and our courier will call round on a working day convenient to you to collect the computer. We will then repair your computer and return it to you free of any carriage charges. (Software not including e.g. Windows 10 Operating System etc)
- WARRANTY EXCLUSIONS
- Operating Systems including third party software
- Accidental Damage.
- General wear and tear, misuse, neglect or damage by the buyer.
- Incorrectly installed goods.
- Overheating due to excessive dirt/dust build up.
- Consumables (Ink Cartridges, batteries, etc).
- Data Recovery & Backing up of data, files and programmes.
- Remedy of incorrectly installed/incompatible software which is not provided
- Remedy of viruses.
- Compatibility of 3rd party software/hardware.
NOTICE: If we find the computer to be damaged by the software and not the hardware, we still will fix this for you (ALL DATA WILL BE LOST), but this will involve a labour charge of £59.99 plus the delivery charge of £14.99. But of course we will confirm this with you in advance.